Common Errors on SP Flash Tool and some Solutions
For those who don't know, SP Flash Tool used to flash, format and read back MTK smart phones.
If you want to know more about and download this tool, click here
Here are some errors and solutions associated with SP Flash Tool hope you find them helpful.
S_FT_ENABLE_DRAM_FAIL (4032)
This sometimes occurs when you are trying to flash a wrong ROM to your device.
If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.
S_NOT_ENOUGH_STORAGE_SPACE (1011)
This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.
Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.
S_UNSUPPORTED_OPERATION (1040)
The scatter file loaded is wrong. load the scatter file of your device.
S_COM_PORT_OPEN_FAIL (1003)
This error is seen when the com ports on your PC are disabled.
Try enabling com ports in your BIOS
S_COM_PORT_OPEN_FAIL (1013)
This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.
S_UNSUPPORTED_VER_OF_DA (1022)
If you get this error, Use a newer version of SP Flash Tool.
S_DA_EXT_RAM_ERROR (3001)
Connection problems. Check USB cord or use another port.
S_DA_EMMC_FLASH_NOT_FOUND (3144)
Wrong scatter file used
S_FT_DOWNLOAD_FAIL (4008)
Change USB cord or
Use Battery to flash the phone or
Change the version of SP Flash Tool. (Older versions preferable)
S_INVALID_DA_FILE (5002)
Use another version of SP Flash Tool
You can add more errors you encounter while using this tool and possibly the solution too.
If you want to know more about and download this tool, click here
Here are some errors and solutions associated with SP Flash Tool hope you find them helpful.
S_FT_ENABLE_DRAM_FAIL (4032)
This sometimes occurs when you are trying to flash a wrong ROM to your device.
If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.
S_NOT_ENOUGH_STORAGE_SPACE (1011)
This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.
Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.
S_UNSUPPORTED_OPERATION (1040)
The scatter file loaded is wrong. load the scatter file of your device.
S_COM_PORT_OPEN_FAIL (1003)
This error is seen when the com ports on your PC are disabled.
Try enabling com ports in your BIOS
S_COM_PORT_OPEN_FAIL (1013)
This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.
S_UNSUPPORTED_VER_OF_DA (1022)
If you get this error, Use a newer version of SP Flash Tool.
S_DA_EXT_RAM_ERROR (3001)
Connection problems. Check USB cord or use another port.
S_DA_EMMC_FLASH_NOT_FOUND (3144)
Wrong scatter file used
S_FT_DOWNLOAD_FAIL (4008)
Change USB cord or
Use Battery to flash the phone or
Change the version of SP Flash Tool. (Older versions preferable)
S_INVALID_DA_FILE (5002)
Use another version of SP Flash Tool
You can add more errors you encounter while using this tool and possibly the solution too.
About Unknown
I AM CHIDI KINGSTECH, A HIGH-TECH MOBILE PHONE SOFTWARE AND HARDWARE "ENGINEER " CONSIDERABLY AM AMONG THE TO TEN LIST IN NIGERIA, FEEL FREE TO MAKE USE OF THE COMMENT SESSION AS SOLUTION WILL BE PROVIDED
0 comments:
Post a Comment